Industrial control cable It is a common cable product in our daily life. As the connecting line between various electrical instruments and automatic instrument devices, it plays the role of transmitting various electrical signals and ensuring the safe and reliable operation of the system. However, when we use the industrial control cable formally, in order to ensure the safety of use, we must follow the relevant principles when wiring. So you know Industrial control cable What are the principles of wiring?
Industrial control cable Wiring shall follow the following principles:
1、 Industrial control cable The weight of cables in the towline should be evenly distributed to avoid accidents caused by uneven weight during operation. The principle of distributing cables is that the heavier cables are located on both sides and the lighter ones are in the middle. All Industrial control cable It must be securely fixed to one end of the tow chain so that the cable can be safely moved to the other end with other devices.
2. According to different cables, the principle of arranging cables in cable protection chain is that when flat cable and circular cable are mixed in drag chain, cables must be installed loosely. Both sides of the cable shall be installed with fixing parts, and circular cables of different sizes shall be avoided as far as possible.
3. When the multi-core cable is small (less than 10 mm), it is recommended to use the guide pipe as the carrier to prevent it from loosening in the cable support chain.
4、 Industrial control cable The cable in the threading chain must run smoothly and straightly without twisting or curling. The cable must be opened from the cable reel or reel and cannot be extracted from the top twisted.